LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Exhaust System) >> Repair Instructions >> Catalytic Converter Front Heat Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2906642

    Install the catalytic converter front heat shield (3).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the 4 catalytic converter front heat shield bolts (2) and tighten to 9 N.m (80 lb in).
  3. Install the catalytic converter front heat shield upper nut (1) and tighten to 9 N.m (80 lb in).
  4. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals