LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Thermostat Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the engine coolant. Refer to Cooling System Draining and Filling .
  2. GM3213166

    Open the retainer spring (2).

  3. Remove the charge air cooler inlet air hose (3) from the turbocharger (1).
  4. GM3213167

    Open the retainer spring (1).

  5. Remove the radiator outlet hose (2) from the water inlet housing.
  6. GM3213191

    Disconnect the wiring harness plug (1).

  7. Remove the 4 engine coolant thermostat housing bolts (4).
  8. Remove the engine coolant thermostat housing with thermostat (3).
  9. Remove the engine coolant thermostat housing gasket (2).
scientia non olet · About LEMON Manuals