LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Shroud Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the radiator. Refer to Radiator Replacement .
  2. GM2887248

    Disconnect the engine coolant fan control module wiring harness plug (1).

  3. Unclip all wiring harness retainer clips and remove the wiring harness (2).
  4. GM2699361

    Remove the engine coolant fan shroud (1).

scientia non olet · About LEMON Manuals