LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Shroud Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2699361

    Install the engine coolant fan shroud (1).

  2. GM2887248

    Install the wiring harness (2) and clip in all retainer clips.

  3. Connect the engine coolant fan control module wiring harness plug (1).
  4. Install the radiator. Refer to Radiator Replacement .
scientia non olet · About LEMON Manuals