LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Shroud Replacement >> Disassemble Procedure

Disassemble Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2887230

    Remove the engine coolant fan control module (1) by unclipping the retainer clip (arrows).

  2. Unclip the engine coolant fan control module wiring harness from the fan shroud.
  3. Remove the 3 engine coolant fan motor bolts (3).
  4. Remove the engine coolant fan motor (2).
scientia non olet · About LEMON Manuals