LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Shroud Replacement >> Assemble Procedure

Assemble Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2887230

    Install the engine coolant fan motor (2).

    2. CAUTION:

    Refer to Fastener Caution

  2. Install the 3 engine coolant fan motor bolts (3) and tighten to 4 N.m (35 lb in).
  3. Clip in the engine coolant fan control module wiring harness.
  4. Install the engine coolant fan control module (1) by clipping the retainer clip (arrows).
scientia non olet · About LEMON Manuals