Engine Coolant Fan Resistor Mount Repair
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedures Remove the engine cooling fan shroud. Refer to Engine Coolant Fan Replacement . |
|
| 1 | Engine Coolant Fan Resistor Mount |
| 2 | Engine Coolant Fan Resistor Mount Bolt
CAUTION:
Refer to Fastener Caution . Procedure In case of a broken engine coolant fan resistor mount use this repair procedure. Tighten 5 N.m (44 lb in) |