LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM1936663

    Install the engine coolant fan.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the 3 engine coolant fan motor bolts (3) to the engine coolant fan and tighten to 4 N.m (35 lb in).
  3. Clip in the engine coolant fan to the engine coolant fan resistor wiring harness (arrows).
  4. Install the engine coolant fan resistor (1) by clipping the retainer clip (2).
  5. Install the engine coolant fan shroud. Refer to Engine Coolant Fan Shroud Replacement .
  6. Close the hood.
scientia non olet · About LEMON Manuals