LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Throttle Body Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the charge air cooler outlet air hose. Refer to Charge Air Cooler Outlet Air Hose Replacement .
  2. Disconnect the throttle body wiring harness plug.
  3. GM2911700

    Remove the charge air bypass valve hose clamp (2).

  4. Remove the charge air bypass valve hose (1).
    5. NOTE:

    Notice the different bolt length.

  5. Remove the 4 throttle body adapter bolts (4).
  6. Remove the throttle body adapter (3).
  7. Remove and DISCARD the throttle body seal (5).
  8. Remove the throttle body (6).
  9. Remove and DISCARD the throttle body seal (7).
scientia non olet · About LEMON Manuals