LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Throttle Body Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2911700

    Install a NEW throttle body seal (7).

  2. Install the throttle body (6).
  3. Install a NEW throttle body seal (5).
  4. Install the throttle body adapter (3).
    5. CAUTION:

    Refer to Fastener Caution .

    NOTE:

    Mind the different bolt length.

  5. Install the 4 throttle body adapter bolts (4) and tighten to 8 N.m (71 lb in).
  6. Install the charge air bypass valve hose (1).
  7. Install the charge air bypass valve hose clamp (2).
  8. Connect the throttle body wiring harness plug.
  9. Install the charge air cooler outlet air hose. Refer to Charge Air Cooler Outlet Air Hose Replacement .
scientia non olet · About LEMON Manuals