General Instructions for Handling the Connectors
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Before Disconnection
WARNING:
Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
NOTE:
The following instructions apply to all of these types of fittings.
Using compressed air, to blow any dirt out of the quick connect fitting.
After Disconnection
- Wipe off the male pipe end using a clean shop towel.
- Inspect both ends of the fitting for dirt and burrs.
- Clean components as required.
- Replace damaged components.