LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Oil Pump Flow Control Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the generator. Refer to Generator Replacement .
  2. Place a collecting basin underneath.
  3. GM3216214

    Disconnect the oil pump flow control valve wiring harness plug.

  4. Remove the 3 oil pump flow control valve bolts (3).
  5. Remove the oil pump flow control valve (2).
  6. Remove an DISCARD the oil pump flow control valve seal (1).
scientia non olet · About LEMON Manuals