Manifold Absolute Pressure Sensor Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Remove the engine sight shield. Refer to Engine Sight Shield Replacement . Disconnect the electrical connection.
1	Intake Air Pressure and Temperature Sensor Bolt CAUTION: Refer to Fastener Caution . Tighten 6 N.m (53 lb in).
2	Intake Air Pressure and Temperature Sensor

Callout

Component Name

Preliminary Procedures

Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
Disconnect the electrical connection.

Intake Air Pressure and Temperature Sensor Bolt

CAUTION:

Refer to Fastener Caution .

Tighten
6 N.m (53 lb in).

Intake Air Pressure and Temperature Sensor