Intake Air Pressure and Temperature Sensor Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedure Remove the engine sight shield. Refer to Engine Shield Replacement . Disconnect the electrical connection.
1	Intake Air Pressure and Temperature Sensor Bolt CAUTION: Refer to Fastener Caution . Tighten 6 N.m (53 lb in).
2	Intake Air Pressure and Temperature Sensor

Callout

Component Name

Preliminary Procedure

Remove the engine sight shield. Refer to Engine Shield Replacement .
Disconnect the electrical connection.

Intake Air Pressure and Temperature Sensor Bolt

CAUTION:

Refer to Fastener Caution .

Tighten
6 N.m (53 lb in).

Intake Air Pressure and Temperature Sensor