LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Intake Air Duct Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2190229

    Install the front intake air duct (2).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install and tighten the front intake air duct bolt (1).
  3. GM2190228

    Install the front intake air duct splash shield (1).

  4. Install and tighten the 2 front intake air duct splash shield bolts (2).
  5. Install the front bumper fascia. Refer to Front Bumper Fascia Guide Replacement (Inner)Front Bumper Fascia Guide Replacement (Outer) .
  6. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .
scientia non olet · About LEMON Manuals