LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Ignition Coil Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
  2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. GM2969112

    Disconnect the 4 ignition coil wiring harness plugs (1).

  4. GM2917572

    Remove the 2 ignition coil bracket bolts (1).

  5. Loosen the ignition coil bracket bolt (4).
  6. Remove the 4 ignition coil bolts (2).
  7. Remove the ignition coil bracket (3).
  8. GM2917577

    Remove the 4 ignition coils (1).

scientia non olet · About LEMON Manuals