LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> HO2S Heater Resistance Learned Values Reset >> With Scan Tool

With Scan Tool

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Select: Module Diagnostics
  3. Select: Engine Control Module
  4. Select: Configuration/Reset Functions
  5. Select: Reset Functions
  6. Select: HO2S Heater Resistance Learned Values Reset
    7. NOTE:

    The scan tool does not display the learn/reset status.

  7. Follow the instructions on the scan tool. - The procedure will complete within 10 s
  8. All OK.
scientia non olet · About LEMON Manuals