LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Fuel Tank Filler Pipe Replacement

Fuel Tank Filler Pipe Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
GM2190279
Callout Component Name
WARNING:

Fuel/gasoline vapors are highly flammable. A fire could occur if an ignition source is present. Never drain or store gasoline or diesel fuel in an open container, due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby.

Preliminary Procedures

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the fuel tank filler pipe housing. Refer to Fuel Tank Filler Pipe Housing Replacement .
  3. Drain the fuel tank. Refer to Fuel Tank Draining .
1 Fuel Tank Filler Pipe Bracket Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Lower Recirculation Tube Quick Release Fitting
3 Fuel Tank Filler Pipe Clamp
4 Fuel Tank Filler Pipe Ground Bolt
Tighten 
9 N.m (80 lb in)
5 Fuel Tank Filler Pipe