LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2371645

    Install the fuel sender assembly (2).

  2. Connect the fuel sender assembly wiring harness plugs (1).
  3. Install the fuel tank fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement .
scientia non olet · About LEMON Manuals