Removal Procedure
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.
- Relieve the fuel system pressure. - Fuel Pressure Relief
- Battery Negative Cable Disconnection and Connection - Disconnect
- Engine Sight Shield Replacement - Remove
- Turbocharger Coolant Return Pipe Replacement - Remove
- WARNING:
Refer to Diesel/Gasoline Vapors Warning .
WARNING:Refer to Safety Goggles and Fuel Warning .
CAUTION:Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution .
Cable Tie(3) - Remove
- Disconnect the electrical connector.(4)
- Fuel Injection Fuel Rail Fuel Pressure Sensor(2) - Remove@Fuel Injection Fuel Rail Assembly(1)