LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Fuel Injection Fuel Feed Front Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection .
  2. Relieve the fuel system pressure.
  3. Charge Air Cooler Outlet Air Hose Replacement  - Remove
  4. GM2914281
    NOTE:

    Lay a lint-free cloth under the fuel injection fuel feed pipe.

    Remove the fuel injection fuel feed pipe bracket bolt (4).

  5. Loosen the 2 nuts (2, 5).
  6. Remove the fuel injection fuel feed pipe (3) from the fuel injection fuel rail (1) and from the fuel injection pump (6).
  7. If the fuel injection fuel feed pipe will be re-used, close the pipe with protecting caps, also. Refer to Electronic Parts Catalog.