LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Solenoid Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4421953

    Install the evaporative emission canister solenoid (1) to the evaporative emission canister (2)

  2. GM4421954

    Rotate the evaporative emission canister vent solenoid valve (2) in direction of arrow until the pin (1) is in the gap.

  3. Evaporative Emission Canister - Install - Evaporative Emission Canister Replacement 
  4. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals