LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Chassis Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the quarter inner trim finish panel - right side. Refer to Quarter Inner Trim Finish Panel Replacement - Right Side .
  2. GM3642881

    Disconnect the chassis control module wiring harness plug (1).

  3. Remove the chassis control module nut (2)
  4. Remove the chassis control module (3) from the chassis control module bracket.