LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Chassis Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3642881

    Remove the chassis control module (3) to the chassis control module bracket.

  2. Install the chassis control module nut (2) and tighten to 8 (71 lb in).
  3. Connect the chassis control module wiring harness plug (1).
  4. Install the quarter inner trim finish panel - right side. Refer to Quarter Inner Trim Finish Panel Replacement - Right Side .
scientia non olet · About LEMON Manuals