LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Charge Air Cooler Outlet Air Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
  3. GM2968106
    CAUTION:

    In order to prevent any possible electrostatic discharge damage to the ECM, do not touch the connector pins.

    Unclip the turbocharger coolant return pipe (4) from the charge air cooler outlet hose (3).

  4. Unclip the charge air cooler outlet hose retainer clamp (2).
  5. Remove the charge air cooler outlet hose (3) from the throttle body (1).
  6. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
  7. GM2968107

    Unclip the radiator inlet hose (1) from the charge air cooler outlet hose (2).

  8. Unclip the charge air cooler outlet hose retainer clamp (3).
  9. Remove the charge air cooler outlet hose (2) from the charge air cooler (4).
scientia non olet · About LEMON Manuals