LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Charge Air Cooler Inlet Air Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2968100

    Position the charge air cooler inlet hose (1) to the engine.

  2. Install the charge air cooler inlet hose (1) to the charge air cooler (2).
  3. Clip in the charge air cooler inlet hose retainer clamp (3).
  4. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .
  5. GM2968099

    Install the charge air cooler inlet hose (3) to the turbocharger (1).

  6. Clip in the charge air cooler inlet hose retainer clamp (2).
  7. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals