LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Camshaft Position Sensor Replacement - Intake >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4375950

    Bend the fuel injection pump gasket (2) to gain access to the camshaft position sensor bolt (1).

  2. GM4375951

    Disconnect the camshaft position sensor electrical connector.(1)

  3. Camshaft Position Sensor Bolt(3) - Remove
  4. Camshaft Position Sensor(2) - Remove
scientia non olet · About LEMON Manuals