LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Camshaft Position Sensor Replacement - Intake >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4375951

    Camshaft Position Sensor(2) - Install

  2. Camshaft Position Sensor Bolt(3) - Install and tighten 10 N.m (89 lb in)
  3. Connect the camshaft position sensor electrical connector.(1)
  4. Engine Sight Shield - Install - Engine Sight Shield Replacement
scientia non olet · About LEMON Manuals