Installation Procedure
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Install the air cleaner element (3).
- Install the air cleaner upper housing (2) to the air cleaner lower housing (4).
- Install the 5 air cleaner housing bolts (1) and tighten to 5 N.m (44 lb in).
Install the air cleaner outlet front duct (2) to the air cleaner housing (1).
- Install the air cleaner outlet front duct clamp (3) and tighten to 3.5 N.m (31 lb in).
Clip in the mass air flow sensor wiring harness retainer clip to the air cleaner housing (1).
- Connect the air mass sensor wiring harness plug (2) to the air mass sensor (3).
CAUTION:
Refer to Fastener Caution .