Installation Procedure
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Install the following components on the drivetrain and front suspension frame:
- CH-906 - 14 Adapter.
- CH-906 - 42 Adapter.
- CH-50342 Threaded Rod.
- Align the insulator tab with the alignment marks (1) on the frame.
NOTE:Check marking of frame insulator.
- Carefully install the frame insulator in to the front suspension frame.
- Install the drivetrain and front suspension frame. Refer to Drivetrain and Front Suspension Frame Replacement .