LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Lighting System - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC B388B or B388C >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

When the headlamp switch is placed in either the park or low beam position, ground is applied to the tail lamp signal circuit to the body control module (BCM). The brake pedal position sensor provides an analog voltage signal to the BCM. The BCM sends this message to the folding top control module via serial data. The folding top control module responds by applying battery voltage to the left and right auxiliary tail/stop lamp control circuits illuminating the left and right auxiliary tail/stop lamps.

scientia non olet · About LEMON Manuals