Folding Top Stowage Compartment Lid Weatherstrip Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Bring the folding top into position 2 respectively position 3. Refer to Folding Top Positions Overview . Remove the quarter window outer belt sealing strip. Refer to Quarter Window Outer Belt Sealing Strip Replacement .
1	Folding Top Stowage Compartment Lid Weatherstrip Procedure Start at the corner of the folding top stowage compartment lid opening and pull the weatherstrip away from the folding top stowage compartment lid opening flange. Working along the edge, install the weatherstrip on the folding top stowage compartment lid ensuring that the carrier is fully seated in the corners. Using a rubber mallet, ensure that the weatherstrip is seated on the entire folding top stowage compartment lid opening flange.

Callout

Component Name

Preliminary Procedures

Bring the folding top into position 2 respectively position 3. Refer to Folding Top Positions Overview .
Remove the quarter window outer belt sealing strip. Refer to Quarter Window Outer Belt Sealing Strip Replacement .

Folding Top Stowage Compartment Lid Weatherstrip

Procedure

Start at the corner of the folding top stowage compartment lid opening and pull the weatherstrip away from the folding top stowage compartment lid opening flange.
Working along the edge, install the weatherstrip on the folding top stowage compartment lid ensuring that the carrier is fully seated in the corners.
Using a rubber mallet, ensure that the weatherstrip is seated on the entire folding top stowage compartment lid opening flange.