Folding Top Side Intermediate Weatherstrip Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedure Remove the folding top side tail garnish molding. Refer to Folding Top Side Rail Garnish Molding Replacement .
1	Folding Top Side Intermediate Weatherstrip Procedure Work along the edge and install the weatherstrip on the folding top so that the carrier is fully seated in the corners. Using a rubber mallet and ensure that the weatherstrip is seated on the entire folding top flange.

Callout

Component Name

Preliminary Procedure
Remove the folding top side tail garnish molding. Refer to Folding Top Side Rail Garnish Molding Replacement .

Folding Top Side Intermediate Weatherstrip

Procedure

Work along the edge and install the weatherstrip on the folding top so that the carrier is fully seated in the corners.
Using a rubber mallet and ensure that the weatherstrip is seated on the entire folding top flange.