LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Folding Top) >> Repair Instructions >> Folding Top Multifunction Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2949064

    Remove the quarter inner trim finish panel - left side (4). Refer to Quarter Inner Trim Finish Panel Replacement - Left Side .

  2. GM3011724

    Remove the retainer clip (2).

  3. Remove the rear seat back armrest hinge bracket (1).
  4. GM3011723

    Remove the 3 fuse block bracket nuts (2).

  5. Disconnect the wiring harness plug (1).
  6. GM3011726

    Flip the fuse block bracket (2) down in a horizontal position.

  7. Disconnect 7 wiring harness plugs (1).
  8. GM3011722

    Unlock the 2 mounting brackets with an suitable tool.

  9. Push the folding top multifunction control module (1) out of the fuse block bracket (3).
scientia non olet · About LEMON Manuals