Folding Top Front Weatherstrip Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedure Remove the folding top front panel. Refer to Folding Top Front Panel Replacement .
1	Folding Top Front Weatherstrip Procedure Start at the corner of the folding top and pull the weatherstrip away from the folding corner. Work along the edge and install the weatherstrip on the folding top ensuring that the carrier is fully seated in the corners. Using a rubber mallet and ensure that the weatherstrip is seated on the entire folding top front flange.

Callout

Component Name

Preliminary Procedure
Remove the folding top front panel. Refer to Folding Top Front Panel Replacement .

Folding Top Front Weatherstrip

Procedure

Start at the corner of the folding top and pull the weatherstrip away from the folding corner.
Work along the edge and install the weatherstrip on the folding top ensuring that the carrier is fully seated in the corners.
Using a rubber mallet and ensure that the weatherstrip is seated on the entire folding top front flange.