Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Install the NEW sensor (2) to the folding top. Use new rivet (3).
Connect the 2 sensor wires (1) to the wiring harness (4). Refer to Wiring Repairs .
Insulate the wiring harness. Use electrical tape.
- For the sensor (1) close the folding top. Refer to Folding Top Manual Operation .
- For one of the sensors (2) install the folding top. Refer to Folding Top Replacement
Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .