Removal Procedure
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
- Bring the folding top into position 2. Refer to Folding Top Positions Overview .
Loosen the folding top hydraulic cylinder - rear upper (1).
- Remove clamp (2)
- Remove pin (3)
- NOTE:
Simplified graphic for better understanding.
Loosen the folding top hydraulic cylinder - rear lower (1).
- Remove clamp (2)
Remove the lower folding top hydraulic cylinder pin (1). It might be necessary for a second mechanic to move the folding top into position in order to remove the pin.
Remove the fixation clamps (1) and remove the hydraulic lines (2) from the hydraulic cylinder.
- Remove the folding top hydraulic cylinder.