LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Folding Top) >> Diagnostic Information and Procedures >> DTC B36B5 and B36B6 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

The folding top control module monitors two hall-effect switches for the folding top positions: The folding top Up position sensor and folding top down position sensor. The sensors monitor the status of the folding top.

The sensors are two-wire hall effect sensors providing an input to the folding top control module. One terminal is low reference and the other is a signal circuit.

scientia non olet · About LEMON Manuals