LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Folding Top) >> Diagnostic Information and Procedures >> DTC B36B1 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool B254 Rear Compartment Lid Position Sensor (Horizontal signal) and B254 Rear Compartment Lid Position Sensor (Vertical signal) is between 9 - 33% and changes with the opening and closing of the rear compartment lid.
    • If not between 9 - 33% or does not change 

      Refer to Circuit/System Testing.

    • Go to next step: If between 9 - 33% and changes 
  3. All OK.
scientia non olet · About LEMON Manuals