LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Folding Top) >> Diagnostic Information and Procedures >> DTC B36AE >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON
  2. Verify the scan tool B248 Folding Top Stowage Compartment Lid Open Position Sensor parameter changes between Active and Inactive when closing and opening folding top.
    • If parameter doe not change between Active and Inactive 

      Refer to the Circuit/System Testing.

    • Go to next step: If parameter changes between Active and Inactive 
  3. All OK.
scientia non olet · About LEMON Manuals