LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Folding Top) >> Diagnostic Information and Procedures >> DTC B36AB and B36AD >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON
  2. Verify the scan tool B246 Folding Top Stowage Compartment Lid Latch Closed Switch and B247 Folding Top Stowage Compartment Lid Latch Open Switch parameters change between Active and Inactive when closing and opening folding top.
    • If parameters do not change between Active and Inactive 

      Refer to the Circuit/System Testing.

    • Go to next step: If parameters change between Active and Inactive 
  3. All OK.
scientia non olet · About LEMON Manuals