LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Folding Top) >> Diagnostic Information and Procedures >> DTC B36A3 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON
  2. Verify the scan tool B242 Folding Top Stowage Compartment Flaps Enable Sensor parameter is between 0.5 - 4.5 V when opening and closing the folding top stowage compartment lid.
    • If parameter does not change between 0.5-4.5 V 

      Refer to the Circuit/System Testing.

    • Go to next step: If parameter changes between 0.5-4.5 V 
  3. All OK.
scientia non olet · About LEMON Manuals