Circuit/System Description
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
The folding top control module monitors three hall-effect switches for the folding top tension bow positions: The folding top tension bow up position sensor, left folding top tension bow down position sensor, and right folding top tension bow down position sensor. The switches monitor the status of the tension bow.
The sensors are two-wire hall effect sensors providing an input to the folding top control module. One circuit is low reference and the other is a signal circuit.