LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Folding Top) >> Diagnostic Information and Procedures >> DTC B12FA and B36A0 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

B12FA 02 

The folding top control module has detected a short to ground in the folding top stowage compartment lid closed position sensor - left circuit.

B12FA 05 

The folding top control module has detected an open or high voltage in the folding top stowage compartment lid closed position sensor - left circuit.

B12FA 08 

The folding top control module has detected an invalid signal in the folding top stowage compartment lid closed position sensor - left circuit.

B12FA 61 

The folding top control module has detected a stuck actuator in the folding top stowage compartment lid closed position sensor - left circuit.

B12F8 02 

The folding top control module has detected a short to ground in the folding top stowage compartment lid closed position sensor - right circuit.

B12F8 05 

The folding top control module has detected an open or high voltage in the folding top stowage compartment lid closed position sensor - right circuit.

B12F8 08 

The folding top control module has detected an invalid signal in the folding top stowage compartment lid closed position sensor - right circuit.

B12F8 61 

The folding top control module has detected a stuck actuator in the folding top stowage compartment lid closed position sensor - right circuit.