LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Folding Top) >> Diagnostic Information and Procedures >> DTC B12F3 and B12F8 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON
  2. Verify the scan tool B43L Folding Top Luggage Barrier Sensor - Left and B43R Folding Top Luggage Barrier Sensor - Right parameters change between Active and Inactive when installing and removing the luggage barrier.
    • If parameters do not change between Active and Inactive 

      Refer to the Circuit/System Testing.

    • Go to next step: If parameters change between Active and Inactive 
  3. All OK.
scientia non olet · About LEMON Manuals