Motors and Solenoids

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Header Latch Motor

The K23 Folding Top Control Module controls the bi-directional M86 Folding Top Header Latch Motor to latch and unlatch the folding top from the header.

Stowage Compartment Flap Motor

The K23 Folding Top Control Module controls the controls the bi-directional M87 Folding Top Stowage Compartment Flaps Motor to open and close the flaps.

Stowage Compartment Lid Latch Motor

The K23 Folding Top Control Module controls the controls the bi-directional M89 Folding Top Stowage Compartment Lid Latch Motor to latch and unlatch the stowage compartment lid.

Folding Top Pump Motor

The hydraulic pump's electric motor generates the pressure and determines the direction of the system's hydraulic fluid used to provide the actuating force for the folding top. The K23 Folding Top Control Module controls the M23 Folding Top Pump Motor and its direction by two outputs which provide the motor supply voltage. The direction of the motor is determined by which output provides the ground and which one provides battery power.

Hydraulic Pump Solenoid Valves

The K23 Folding Top Control Module controls the Q16A Folding Top Solenoid Valve 1, Q16B Folding Top Solenoid Valve 2, and Q16C Folding Top Solenoid Valve 3 independently to direct fluid to the necessary cylinders to operate the power folding top.