VIN Body Stamping
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
The stamping is located on the front floor panel under the front right-hand floor mat. It can be seen under the VIN plate opening access cover (1). If equipped remove insulator foam block.
| Position | Definition | Character | Description |
|---|---|---|---|
| 1 | Region of Build | W | Europe |
| 2 | Manufacturer | 0 | Adam Opel GmbH |
| 3 | Vehicle Brand/ Type | 4 | Buick Passenger Car |
| 4 | Vehicle Line | W | Buick Cascada |
| 5 | Series | G | Buick Cascada 1SV |
| H | Buick Cascada Premium Group | ||
| H | Buick Cascada Sport Touring Group | ||
| 6 | Body Style | 3 | 67 - Coupe, 2 - Door, Convertible |
| 7 | Restraint System | N | AYL - Active Manual Belts, Airbags - Driver & Passenger - Front (1st row), & Front Seat Side (1st row), Driver & Passenger Knee (1st row) |
| 8 | Engine Type | 5 | LWC - Engine Gas, 4 CYL, 1.6L, SIDI, Turbo, DOHC, VVT, HO, FAM 1, GEN 4, GME |
| 9 | Check Digit | - | 0~9, X - According to 49 CFR 565 |
| 10 | Model Year | K | 2019 |
| 11 | Plant Location | G | Gliwice (Poland) |
| 12 - 17 | Sequence Number | - | Positions 12 - 17 represent the number sequentially assigned by the manufacturer in the production process. |
1.6L (LWC) Engine ID and VIN Derivative Location
Automatic Transmission - 6T45 (MH7) ID and VIN Derivative Location