LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Lighting System - Repair Instructions) >> Repair Instructions >> Suspension Position Sensor Calibration >> Calibration Procedure

Calibration Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON/vehicle in Service Mode.
  2. Install a scan tool.
  3. Navigate to the Configuration/Reset Functions menu of the Headlamp Control Module.
  4. Select Configuration/Reset Functions.
  5. Select Headlamp Leveling Sensor Learn procedure and follow the directions displayed on the screen.
scientia non olet · About LEMON Manuals