LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Lighting System - Repair Instructions) >> Repair Instructions >> Headlamp Leveling Rear Suspension Height Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery. Refer to Battery Negative Cable Disconnection and Connection .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. GM2372542

    Disconnect electrical connector (1).

  4. GM2372543

    Remove headlamp leveling rear suspension height sensor (2).

  5. Remove headlamp leveling rear suspension height sensor bolt (1).
scientia non olet · About LEMON Manuals