Headlamp Leveling Front Suspension Height Sensor Exciter Plate Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
1	Headlamp Leveling Front Suspension Height Sensor Exciter Plate Bolt CAUTION: Refer to Fastener Caution . Tighten: 2.5 N.m (22 lb in)
2	Headlamp Leveling Front Suspension Height Sensor Exciter Plate Procedure The headlamp leveling front suspension height sensor exciter plate has to be pushed forward and upward during assembly and fastening of the bolt. After repairs, refer to Control Module References for programming and set up procedures. Aim the headlamps. Refer to Headlamp Aiming

Callout

Component Name

Headlamp Leveling Front Suspension Height Sensor Exciter Plate Bolt

CAUTION:

Refer to Fastener Caution .

Tighten:
2.5 N.m (22 lb in)

Headlamp Leveling Front Suspension Height Sensor Exciter Plate

Procedure

The headlamp leveling front suspension height sensor exciter plate has to be pushed forward and upward during assembly and fastening of the bolt.
After repairs, refer to Control Module References for programming and set up procedures.
Aim the headlamps. Refer to Headlamp Aiming